东北三省全面振兴的社会经济支撑能力评估     

马丽  田华征  康蕾  戚伟 《地理科学》2020,40(6):863-873

在解析支撑能力和东北问题特点的基础上，从“创新、协调、绿色、开放、共享”五大理念出发建立全面振兴社会经济支撑能力评价指标体系和综合评价方法，以地级市为单元对东北三省进行评估。研究发现：各地市社会经济支撑能力差异显著，哈大沿线核心城市的支撑能力较强，西翼城市以及朝阳、七台河、绥化、葫芦岛、铁岭、双鸭山和鹤岗等资源型城市支撑能力较弱。因此未来东北地区在振兴政策的区域分布上应有所侧重，对不同地区施以不同的振兴或扶持政策。在创新、绿色、开放方面需要集中力量重点突破，而在体制机制改革和共享服务建设方面需要全面覆盖，并重点加强黑龙江北部和辽宁、吉林西翼城市的共享能力建设。  相似文献   

China’s rural revitalization and development: Theory,technology and management     

Liu  Yansui  Zang  Yuzhu  Yang  Yuanyuan 《地理学报(英文版)》2020,30(12):1923-1942

Journal of Geographical Sciences - The urban-rural transformation from dichotomy to integration is a gradual process. Like rural areas in many countries, Chinese rural society is experiencing a...  相似文献   

考虑冲刷影响的筒型基础竖向极限承载力研究     

陆罗观  刘润  练继建  陈广思 《海洋工程》2019,37(3):69-77

大直径宽浅式筒型基础,阻水宽度大,在位工作期间受波浪海流作用,其周围土体易被冲刷。为研究单侧地基土体受冲刷后筒型基础的竖向极限承载力变化,通过引进冲刷率的概念,采用有限元方法研究了不同冲刷率下筒型基础的竖向极限承载力;并基于Meyerhof理论建立了计算不同冲刷率下筒型基础竖向极限承载力的极限平衡方法。研究结果表明,随着冲刷率增大,筒型基础的极限承载力出现不同程度的下降,当冲刷率为0.8时,即筒型基础单侧土体冲刷深度达6.4 m时,筒型基础的竖向极限承载力折减率为3.28%。建立的极限平衡算法可准确计算冲刷条件下筒型基础的竖向极限承载力。  相似文献   

海南岛海岸带土地利用强度与生态承载力分析     

李通  闫敏  陈博伟  张丽  宋茜茜 《测绘通报》2020,(9):54-59

随着海南省进一步开放发展，海岸带区域的土地利用强度逐渐加强，生态保护需求日益增强。利用4期（1990、2000、2009、2015年）海岸带土地利用分类数据，研究海岸带土地开发利用强度，并分析了其生态承载力。结果表明：①耕地和林地是海南岛海岸带地区的主要土地类型。②25年间，海南岛海岸带土地利用强度整体较高且逐年上升，2000—2009年土地利用强度增速最高，达2.03%；海口市和澄迈县土地利用强度4期均值最大，分别为300.5和286.1。③25年来海南岛海岸带生态状况呈下降趋势，57%的海岸带市县实际生态承载压力增长了1倍以上。  相似文献   

Experimental study on a sampling technique based on a freeze-sediments valve for deep-sea microorganism     

《Applied Ocean Research》2019

Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future.  相似文献   

资源环境承载协调理论与评价方法     

李瑞敏  殷志强  李小磊  刘琼  孟晖  黄道袤  王轶  王龙平  王欣宝  刘建奎  孙超  赵德刚 《地质通报》2020,(1):80-87

资源环境承载能力评价是进行国土空间规划和用途管控的基础性工作,越来越受到国家重视。在资源环境承载能力研究实践中,以自然资源环境系统及其与社会经济系统的关系为主要研究对象,创新性提出了"资源环境承载协调理论",并基于此理论初步建立了不同空间尺度的地质资源环境承载能力评价技术方法,构建了地质环境、地下水资源、矿产资源等不同资源环境要素的承载能力评价指标体系,包括承载本底评价指标和承载状态评价指标。规范了不同尺度的资源与环境承载能力评价流程,为有序推动全国、区域及市县尺度的自然单元和行政单元的地质资源环境承载能力评价工作提供了强有力的。  相似文献   

高压旋喷桩单桩承载力分析     

王勃  行小盈 《岩土工程技术》2020,(1):48-52

高压喷射注浆于1968年首创于日本。我国于20世纪70年代初相继引进并开始研究高压喷射注浆技术。目前,高压旋喷工艺应用最为广泛,工艺技术最为成熟。对旋喷桩成桩质量及单桩承载力进行研究分析,为旋喷桩在地基与基础工程、水利水电工程、止水、加固工程中的应用提供设计参考依据。该试验在陕西省延安市某建成小区内选三个试验点,按不同旋喷桩施工工艺成桩,通过对桩身完整性检测、单桩承载力试验,分析旋喷桩成桩质量及单桩承载力。  相似文献   

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings     

Santosh Kumar Yadav  Guan-lin Ye  Usama Khalid 《Marine Georesources & Geotechnology》2020,38(4):400-416

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.  相似文献   

Reliability based assessment of axial pile bearing capacity: static analysis,SPT and CPT-based methods     

Sara Heidarie Golafzani  Abolfazl Eslami 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2020,14(3):216-230

ABSTRACT

Since piles are one of the major geotechnical foundation systems, estimation of their axial bearing capacity is of great importance. Employing different design methods, resulting in a wide range of bearing capacity estimations, complicates the selection of an appropriate design scheme and confirms the existence of model error along with the inherent soil variability in bearing capacity prediction. This paper tends to evaluate different predictive methods in Reliability-Based Design (RBD) framework. In this regard, different static analyses, SPT and CPT-based methods are considered to evaluate which approaches collectively and which method individually, have more reliable predictions for compiled data bank. In order to assess reliability indices and resistance factors, two approaches have been considered, i.e. First Order Second Moment method (FOSM) and First Order Reliability Method (FORM). To investigate the reliability indices for different methods in both RBD approaches, various safety factors and loading ratios have been considered. Also, the Load and Resistance Factor Design (LRFD) resistance factors are calibrated for different target reliability indices and loading ratios. Results show that CPT-based methods are more reliable among other methods. Furthermore, the estimated efficiency ratio, i.e. the ratio of resistance factor to resistance bias factor, confirms this agreement.  相似文献